Photos have surfaced that purport to show Apple's next iPad having a bonded LCD and front-panel glass display, allowing it to be even thinner than the current 7.5mm (0.29-inch) thick iPad Air – or perhaps the same thickness, but with a larger battery. Leaked photo of purported new iPad display, back Here's the back of the …
Slimmer?! It's so damn slim now it's actually hard to hold.
Maybe they were irked by the Samsung commercial that made fun of their iPad Air/pencil commercial and one-upped their thinness.
It shows the pencil, then the iPad Air behind it (as the iPad commercial does), and then the slimmer Galaxy Tab Pro 10.1 behind that: https://www.youtube.com/watch?v=fThtsb-Yj0w
Given the size of an iPad exceeds that which can be sensibly held from the back by a single hand, how would one hold onto an iPad (or any tablet) without a bezel without constantly mashing the screen with random buttons? Maybe glue a chunky door-knob onto the back for grip?
Re: Edge-to-Edge Display?
>how would one hold onto an iPad (or any tablet) without a bezel
With whatever you care to connect to the recesssed bayonet mount located around the Apple logo on the back.
"leaked from China...
"...and presumably were shot by a component supplier"
Or leaked by Apple themselves to get some pre-launch publicity buzz...
(Pardon my cynicism)
@Graham Marsden Re:"Or leaked...."
Indeed. I realise that El Reg has to earn its crust like the rest of us. However, I do think that they could, now and then, restrain themselves from giving the publicity hungry corporate troll the meal it so evidently desires. After all, in this case, El Reg have little to lose - hmmm?
Why do they keep making it thinner, already every person I know with a tablet shove them into cases..
A friend kept his tablet in an 'Otterbox' brand case. He thought it was cool, until I told him that his precious and formerly-cool tablet now looked a bit like a mentally-challenged child sent outside wearing a helmet.
All those people making anything over 80gsm better watch out, they're risking being sued for infringing on patents to do with slimness.
Fake - it's a mobile device repair stall...
If you look carefully at the background, you can see that this was shot in one of those dime-a-dozen repair shops all over China. I seriously doubt it's a leak, probably photos of a knockoff.
Doesn't this mean when the super brittle glass of your ipad cracks, you need to replace the tft as well? even if that would have been undamaged before.
yes but relax, next ipad they'll bond the battery on as well so the whole thing can break with one big satisfying CRACK. It might sound bad at your end but in Cupertino all they will hear is KERCHING.
In theory, yes. But in practice, it should be fine. The screen on the Surface RT / Surface 2 is bonded. I dropped that once onto a tarmacked road and although the very edge chipped slightly, it landed face down and didn't even scratch. Gorilla Glass is tough and I would assume that the new iPad is similarly equipped. Especially if it's bonded to the screen like the Surface.
So am I to assume that the downvotes are because someone doesn't like me saying the iPad will not crack easily, because I dared mention a Surface, or are they just offended by my dropping tech onto a hard surface?
What does go through some people's heads?
or are they just offended by my dropping tech onto a hard surface?
You didn't drop it under a bus.
2x the thickness
How about making them twice as thick? They could be much stronger and could fit a battery that would last for a couple of days. At some point, there is a thing as too thin. It's not as if you'd be shoving this into a tight pocket.
Re: 2x the thickness
Stop with this nonsense!
I need a tablet that can double as a cheese knife.
Re: 2x the thickness
NO! iPads should be thin enough to cut bread/their owners/air molecules that drift too close, in exactly the same way that what people really want is phones with screens so big you can hang them on the wall to hide your TV.
(A friend got a Sony Z1 'Compact' the other day, it's as big as her old iPhone, I dread to think how big the Z1 is.)
No screws- more glue?
The Cupertino gang have only managed thin by eliminating screws, and serviceability, and using glue.
Not exactly Green.
No idevice repairability == customer buys a new idevice.
Planned obsolescence is the engine which powers the growth of the mobile market.
So a dude buys the slimmest tablet/phone
only to pack it into an inch thick case
makes sense, but never ceases to amaze me
Re: So a dude buys the slimmest tablet/phone
my case is only 2cms thick, that is less than an inch. In fact, it is slimmer than an inch.
Because of all the things that could be done to up the iPad's game, extra thinness is top of everyone's list.
This post brought to you by the Midori browser running on a Raspberry Pi (about a half inch thick with case)
Just because I can.
I'm waiting for the iPad Pro to be re-rumoured....
Now MS Office* is available for the fruity fondleslab, a bigger model makes more sense than ever.
* A big win for both Microsoft and Apple, regardless of how much most of us dislike the subscription model. IMHO.
Wafer thin mint?
Instead of adding functionality/battery, let's just make it thinner and thinner because looks are everything
Ok, I'll admit it
I never thought the original iPad was exactly thick in the first place!!?? In comparison to what came before it, it was a lightweight, and even when it was released it was thin. Even today, 4 years on, and our original iPad used daily still does not feel thick. And who cares about the thickness when a case easily doubles the thickness of the device anyway?
I blame techies for have weak left hands and limp handshakes with cries of "it's so heavy". Pussies.
Re: Ok, I'll admit it
A couple of days ago I was holding an iPad 1 immediately after a Samsung Tab 3 in a case. I was amazed at how thick and clunky it felt, even though when it came out it was the epitome of lightness. Like frogs in slowly warming water, we don't notice the pace of change (until we get to see the difference between old and new).
I can see the argument for being as thin as possible; it's not just convenience, it improves heat dissipation. But I am amazed that they get it all in there.
- Teardown Pop open this iPhone 6 and see where the magic oozes from ... oh hello again, Qualcomm
- Analysis Apple's warrant canary riddle: Cock-up, conspiracy, or anti-Google point-scoring
- Pics Facebook's Oculus unveils 360-degree VR head tracking Crescent Bay prototype
- Bargain basement iPhone shoppers BEWARE! eBay exposes users to phishing vuln